Showing 1 - 10 of 26, total 3 pages [First] [Previous] [ Next] [ Last] |
| |
1 | | | tool steel
Specification: Round Bar:dia 50-200mm Flat Bar :thickness:20-28 width:80-300 th
Detail: This steel for hardening in the airflow with the high hardenability. The steel is characterized by a relatively high hardness after hardening, especially good toughness against the stress by pressure of shocks and hits, very g...
|
|
2 | | | skd11
Specification: Round Bar dia 10-400mm Flat bar:thickness:20-28 width:80-300 thi
Detail: This steel for high performance cutting tools, toughness better than D3, possibility of nitriding. This alloy possesses a very high compressive strength and is deep hardening
|
|
3 | | | o1 tool steel
Specification: Round Bar:dia 10-400mm Flat Bar:thickness:20-28 width:80-300 thi
Detail: This steel is a high quality non-distorting cold work tool steel. 1.2510 100MrCrW4 has combined manganese chromium tungsten and is characterised by giving high surface hardness after heat treatment and tempering, good dimensio...
|
|
4 | | | d6
Specification: Round Bar:dia 10-500mm Flat Bar:thickness:20-28 width:80-300 thi
Detail: This steel is a high carbon high chromium quality tool steel giving very high wear resistance and edge holding quality. 1.2436 is a air hardening alloy tool steel with excellent resistance to wear and abrasion. 1.2436 is a too...
|
|
5 | | | d3 cold work steel
Specification: Round Bar dia 10-400mm Flat Bar:thickness:20-28 width:80-300 thi
Detail: This steel with big hardenability for hardening in oil and in air, especially high resistance to the wear both by metal and by mineral substances, good cutting power, very high hardness in the pressure, significantly low tough...
|
|
6 | | | d2 tool steel
Specification: Round Bar dia 10-400mm Flat Bar:thickness:20-28 width:80-300 thi
Detail: This steel with big hardenability for hardening in oil and in air, especially high resistance to the wear (higher than by 1.2080), good cutting power, very good firmness in the pressure, lower toughness (but higher than by 1.2...
|
|
7 | | | 1.2581
Specification: Round Bar dia 10-400mm Flat Bar:thickness:20-28 width:80-300 thi
Detail: This steel for hardening in oil and possibly in air with very good hardenability, very high firmness during the heat and resistance to the tempering, high resistance to the hot tempering and good toughness. Further the steel h...
|
|
8 | | | 1.2323
Specification: Round Bar dia 10-400mm Flat Bar:thickness:20-28 width:80-300 thi
Detail: This steel for hardening in the stream of air or in oil with high hardenability. The steel has high hardness after hardening, good resistance to the tempering, good toughness and good firmness during the heat. Is resists quick...
|
|
9 | | | 1.2367
Specification: Round Bar dia 10-400mm Flat Bar:thickness:20-28 width:80-300 thi
Detail: This steel for hardening in oil and in air with very good hardenability, high firmness during the heat and resistance to the tempering, very good toughness and plastic properties during normal and also higher temperatures. Fur...
|
|
10 | | | 1.2713
Specification: Round Bar dia 10-400mm Flat Bar:thickness:20-28 width:80-300 thi
Detail: This is one of the special purpose, low alloy tool steel grades, similar to the W group of low alloy tool steels. L6 contains nickel, chromium and molybdenum for a good combination of toughness and hardenability.
|
|
Home
